Below is a full list of analytical tests performed by us.
OR
Search the test list for entries containing:
A
B
C
D
E
F
G
H
I
L
M
N
O
P
S
T
U
V
W
X
Z
- Acetone
- Acid Acceptance
- Acid Extractables
- Acid Extraction
- Acid Number
- Acid Number For further information on this test, please contact TEI.
- Acidity
- Acidity as CaCO3 by EPA Method 305.1 Applicable to surface waters, sewages and industrial wastes, particularly mine drainage and receiving streams, and other waters containing ferrous iron or other ...
- Acidity or Alkalinity by EP Method
- Acid-Soluble Substances
- Active Sulfur
- Alcohols
- Alkalinity as CaCO3
- Aluminum by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Ammonia
- Ammonium Sulfate
- Antimony by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-OES)
- Arsenic by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Ash
- Assay
- Assay for Calcium Oxide
- Assay for Silicon Dioxide
B
- Barium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Base/Neutrals by EPA Method 8270D Used to determine the concentration of semivolatile organic compounds in extracts prepared from many types of solid waste matrices, soils, air sampling media and ...
- Benzene
- Beryllium
- bis(2-ethylhexyl)phthalate
- Bismuth
- Boron by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy(ICP-OES)
- Bottom Sediment and Water
- Bromide by ASTM Method D4327 Determination of bromide in water by ion chromatography.
C
- Cadmium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Calcium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Carbon
- Carbonate
- Cation Exchange Capacity by EPA Method 9081 For soil samples
- Cerium
- Chloride
- Chlorine
- Chromium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Chromium (VI)
- Cobalt by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- COD by EPA Method 410.4 Covers the determination of chemical oxygen demand (COD) in ground and surface waters, domestic and industrial wastes.
- Conductivity
- Conductivity by EPA Method 120.1 Determines conductance of drinking, surface, and saline water, domestic and industrial wastes and acid rain (atmospheric deposition).
- Copper
- Cyanide
D
- Degrees Baume
- Density
- Dissolved Iron
- Dissolved Iron by EPA Method 200.7 Determines iron in the dissolved fraction of aqueous samples and for the measurement of total-recoverable analytes in water, wastewater, and solid wastes. ...
- Dissolved Lead
- Dissolved Lead by EPA Method 239.1 Determines dissolved lead by flame atomic absorption
- Dissolved Solids
- Dissolved Solids by EPA Method 160.1 This method determines filterable residue in drinking, surface, and saline waters; domestic and industrial wastes.
- Dissolved Zinc
- Dissolved Zinc by EPA Method 289.1 Determine zinc by flame atomic absorption spectrometry. Sample pretreatment according to EPA Method 200.0 determines the applicability.
- Distillation
- Distillation by ASTM Method D86 Covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as ...
E
- Ethanol
- Ethyl Benzene
- Ethylene Glycol
- Ethylene Oxide
F
- Fatty Acid Methyl Esters (FAME)
- Filter Weight
- Flash Point
- Fluoride
- Fluoride by EPA Method 300.1 Determines flouride in reagent water, surface water, ground water, and finished drinking water. Methyl fluoroacetate is measured using the fluoride ion.
- Fluorine
G
- Gas Chromatography (GC)
- Gas Chromatography-Mass Spectrometry (GC-MS)
H
- Hardness
- Hardness as CaCO3 by EPA Method 130.2 Determines total hardness in drinking, surface, and saline waters; and domestic and industrial wastes.
- HCl
- Heavy Metals
- Herbicides
- Hexavalent Chromium
- HF
- HNO3
I
- Identification
- Ion Chromatography
- Iron by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Iron Oxide by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Isopropanol (IPA)
L
- Leachable Ammonium
- Leachable Arsenic by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Leachable Bromide by ASTM Method D4327 Determination of leachable bromide in water by ion chromatography.
- Leachable Chloride by ASTM Method D4327 Determination of leachable chloride in water by ion chromatography.
- Leachable Fluoride by ASTM Method D4327 Determination of leachable fluoride in water by ion chromatography.
- Leachable Halogens as Cl by ASTM Method D4327 Determination of leachable halogens in water by ion chromatography.
- Leachable Iodide by ASTM Method D4327 Determination of leachable iodide in water by ion chromatography.
- Leachable Lead by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Leachable Lead by NF Method For further information on this test, please contact TEI.
- Leachable Lithium
- Leachable Lithium by Ion Chromatography
- Leachable Nitrate by ASTM Method D4327 Determination of leachable nitrate in water by ion chromatography.
- Leachable Nitrite by ASTM Method D4327 Determination of leachable bromide in water by ion chromatography.
- Leachable Phosphate by ASTM Method D4327 Determination of leachable phosphate in water by ion chromatography
- Leachable Potassium by Ion Chromatography
- Leachable Silicate by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Leachable Silicone
- Leachable Sodium
- Leachable Sodium by Ion Chromatography
- Leachable Sulfate
- Leachable Sulfate by ASTM Method D4327 Determination of leachable sulfate in water by ion chromatography.
- Lithium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Lithium by Ion Chromatography
- Loss on Drying
- Loss on Drying by EP Method
- Loss on Drying by NF Method
- Loss on Drying by FCC Method
- Loss on Ignition by FCC Method
- Loss on ignition by NF Method
M
- Magnesium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Magnesium by Ion Chromatography
- Manganese by EPA Method 200.7 Determines manganese in the dissolved fraction of aqueous samples and for the measurement of total-recoverable analytes in water, wastewater, and solid wastes.
- Manganese by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Mercury by AA
- Mercury by EPA Method 101A Applicable for the determination of Hg emissions from sewage sludge incinerators.
- Metals Scan
- Methanol
- (EPA) Method 204F Distillation
- (EPA) Method 204F Distillation Volatile Organic Compounds Content in Liquid Input Stream Applicable for determining the input of volatile organic compounds (VOC).
- (EPA) Method 524.2 - VOCs in Water Using GCMS Determines purgeable volatile organic compounds (including some disinfection byproducts) in surface water, ground water, and drinking water in any stage
- (ASTM) Method D3695 - Volatile Alcohols in Water
- (ASTM) Method D3695 - Volatile Alcohols in Water Covers a wide range of alcohols with various structures and boiling points that can be separated and detected quantitatively in water
- Molecular Weight
- Molybdenum by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
N
- n-Butanol
- Nickel by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Nitrate by ASTM Method D4327 Determination of nitrate in water by ion chromatography.
- Nitric Acid
- Nitrite by ASTM Method D4327 Determination of nitrate in water by ion chromatography. Nonsiliceous Substances
- n-Propanol
- NVR
O
- Oil and Grease
- Oil and Grease by EPA Method 1664 Determines n-hexane extractable material (HEM; oil and grease) and n-hexane extractable material that is not adsorbed by silica gel (SGT-HEM; non-polar material) ...
P
- Palladium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Polychlorinated Biphenyls (PCBs)
- Polychlorinated Biphenyls (PCBs)
- Pentane
- Pesticides
- pH
- Phenols
- Phosphate
- Phosphorus by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Platinum by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
- Potassium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Potassium by Ion Chromatography
S
- Selenium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Semivolatiles
- Sieve Analysis
- Silica
- Silica (Gravimetric)
- Silicate
- Silicon by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Silicone
- Silicone as Si
- Silver by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- SO2
- SO3
- Sodium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Sodium by Ion Chromatography
- Specific Gravity
- Specific Gravity by ASTM Method D1298 Determines the density, relative density (specific gravity), or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally…
- Strontium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Sulfate
- Sulfate by EPA Method 375.4 This method determines sulfate in drinking and surface waters; domestic and industrial wastes.
- Sulfite
- Sulfur
- Sulfuric Acid
- Suspended Solids
- Suspended Solids by EPA Method 160.2 Determines non-filterable residue in drinking, surface, and saline waters; domestic and industrial wastes.
T
- Total Halogens
- Totals Halogens as Cl by ASTM Method D4327 Determination of halogens in water by ion chromatography.
- Total Sulfide
- Tantalum by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Toxicity Characteristic Leaching Procedure (TCLP)
- Toxicity Characteristic Leaching Procedure (TCLP) by EPA Method 1311 Designed to determine the mobility of both organic and inorganic analytes present in liquid, solid, and multiphasic wastes.
- Thallium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Tin by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Titanium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Titration Table Verification
- Total Organic Carbon (TOC)
- Total Bromine by ASTM Method D4327 Determination of bromine in water by ion chromatography.
- Total Chlorine
- Total Chlorine by ASTM Method D4327 Determination of bromide in water by ion chromatography
- Total Chromium
- Total Fluorine
- Total Fluorine by ASTM Method D4327 Determination of fluorine in water by ion chromatography.
- Total Iodine
- Total Iodine by ASTM Method D4327 Determination of iodine in water by ion chromatography
- Total Iron
- Total Iron by EPA Method 200.7 Determines copper in the dissolved fraction of aqueous samples and for the measurement of total-recoverable analytes in water, wastewater, and solid wastes.
- Total Phosphorus
- Total Phosphorus by EPA Method 365.2 Determines dissolved and total orthophosphate, hydrolyzable phosphate, and phosphorus (all forms) in drinking, surface and saline waters; domestic and industrial wastes.
- Total Solids
- Total Solids by EPA Method 160.3 Determines total residue in drinking, surface, and saline waters; domestic and industrial wastes.
- Total Sulfur
- Total Sulfur by ASTM Method D4327 Determination of sulfur in water by ion chromatography.
- Total Zinc
- Total Zinc by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Tungsten by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Turbidity
U
- Undissolved Solids
- Undissolved Solids For further information on this test, please contact TEI.
- UV-Visible
V
- Vanadium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES
- Viscosity
- Volatile Organic Compounds (VOCs)
W
- Water Content
- Water Soluble Zinc by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES).
- Water-Soluble Substances
X
- Xylenes
Z
- Zinc by EPA Method 200.7 Determines zinc in the dissolved fraction of aqueous samples and for the measurement of total-recoverable analytes in water, wastewater, and solid wastes.
- Zirconium by EPA Method 6010C Trace elements in solution by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-OES)
|
Dolton Branch: Dolton Branch:
14753 Greenwood Rd. 1040 Maryland Ave. Dolton, IL 60419 Dolton, IL 60419 |
©
2017 Water Integrated Treatment Systems, LLC | All Rights Reserved